Car Paintless Dent Removal Repair Puller Kits Hail Damage Dent Hammer Auto Tools

Description

Product Description
US Car Paintless Dent Repair Puller Kits Hail Damage Dent Removal Hammer Tools
The products of each set are shown in the
each set
Main Picture
About 2-in-1 Dent Removal T Bar Tools Feature:
Professional Desig
n
Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor.
Paintless Repair
The T-bar dent puller is made of tempered high-carbon stainless steel and standard stainless steel. in the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint, even the rubber hammer suitable for uneven dents has a good rubber package.
Widely Used
Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.
Easy to Used
Tools coming with detailed repair steps introduction for operate, it makes the dent removal process so easy. Instead of spending hundreds of money in 4s shops, our dent removal puller repair tool kits can help you repair your cars by yourself for many times, so it can save a lot of money and time for you.
Note:
This tool can handle about 70% - 80% of dents. the smooth and hail the pit to repair effect are better, the impact to have sharp edges, sharp body lines and the paint has been damaged is difficult to repair.
About Golden Dent Lifter:
1.Aluminum body.
2.Stainless Steel Adjustment knob.
3.Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips.
4.One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter.
5.With sandblasting oxidation process, the smooth texture feels and outstanding looks, The product is very strong and durable.
6.On the bottom of the dent lifter is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be torn down.
Note:
1.Use adjustable lifting-mode movable tripod puller and adjust it against the size of the dent.
2.During operation, you need to adjust your force gradually until the position where the dent is located is pulled to the flat and recovered entirely.
3.The Dent Lifter squeeze trigger will allow you to control and massage door dings and hail damage until the desired results are achieved.
4.New
material and new design, stronger material.
Golden Bridge Dent Puller
Material: Stainless Steel + Plastic
Professional design
- Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor.
Protecting the original paint
- The dent puller is made of advanced plastic. in the parts of the body contact with high-quality foam bottom, can avoid damage to the original paint.
Widely used
- Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on an automobile, refrigerator, washing machine, and other metal surface dents.
Do it yourself
- To
ols
coming with detailed re
pair steps introduction for operating, it makes the dent removal process so easy. Instead of spending hundreds of money in 4s shops, our dent repair tool kits can
help you repair your cars by yo
urself many times, so it can save a lot of money and time for you.
About Rubber
Hammer & Mini Nylon Knock Pen Repair Set:
Features:
√
Suit for all kinds of flat metal dent
- such as the surface of automobile metal plate and the washing machine's metal plate.
√
Avoid Scratches
- A versatile tool with detachable ends. Plastic and metal faces. If you work with metals, you will need a hammer with rubber and plastic heads to avoid scratches.
√
Stable And Smooth
- Lightweight tubular steel handle shifts the weight balance toward head for extra power in each blow.
√
Anti Slip
-
Extra soft, non-slip rubber handle grip for ultimate comfort and control.
√
Perfect Selection
- Handle made of steel, with ergonomic design, comfort grip, suitable for prolonged use.
About 20 W Mini Glue Gun:
Material: Plastic & Aluminum
Working power: 20 W
Working voltage: 100 to 230 V
Working temperature: 356 to 392
Nozzle diameter: 0.070-0.078 inch
Warm-up time: 3-5 minutes
Cable length: 55 inch
Size: 5.1 inch*4.3 inch*1 inch
Color: Blue
Warm Prompt
:
1. Keep clean of the glue sticks to avoid impurity block the nozzle, and do not pull out of the remanent glue sticks after each time using.
2. To avoid get an electric shock during use, do not use it in humid
environment and keep it away from children.
3. The remaining pressure inside the glue gun will push a little molten glue out of the gun even stop use, so to save your glue,
please control release the trigger or cut off the power in advance.
4. Cut off the power when stop using, and never try to disassemble the melt glue gun in any case.
About Different Sizes Glue Puller Tabs
Specifications
Material: strengthen plastic
Features:
1. Different tabs for different dent lifter or the Slide Hammer, Works with All Glue Pullers.
2. Unique small pits design, fit for Auto Body Dent Repair, this special face can bond the glue well, also clean it easily, the size can match perfectly with dent puller/lifter.
3. Durable design allows for perfect placement and superior adherent properties.
Step-By-Step Instructions for Repairing Car Paintless Dent
1. Prep tabs by soaking them in 91% rubbing alcohol and drying them before first use.
2. Insert a glue stick into the glue gun. Plug in the glue gun and allow it to heat up for 5 minutes.
3. Clean the area to be repaired with 91% isopropyl rubbing alcohol and a clean towel.
4. Select the correct sized dent pulling tab by comparing it to the size of the dent.
5. To save time when doing multiple repairs, glue and place all of the tabs at once on the vehicle, then do all of the repairs.
6. Apply hot glue to the dent pulling tab by pulling on the trigger of the glue gun until approximately a dime sized amount of glue is released. Use a pea sized drop of glue for smaller tabs and a dime size or slightly more for larger tabs.
7. Apply the dent pulling tab to the exact center of the dent.
8. Allow the glue to set for about 5 minutes. The glue should be hard to the touch at the time you begin repair.
9. Slide the dent lifter device directly over the dent pulling tab shaft until the female adapter in the center of the dent lifter slides over the shaft of the tab. Adjust the height knob accordingly.
9a
. The T-Hand Puller may be used for larger dents or to remove the last 10-20%of a dent.
10. Squeeze the dent lifter handle slowly several times until the desired result is achieved. As the damage gets smaller, reduce the size of the dent pulling tab until the dent becomes flush.
11. Spray 91% rubbing alcohol on the edge of the glue and p
e
el it away using the plastic scraper. .
12. If a high spot is created, gently tap down any high spots using the dent hammer and the plastic tap down tool provided, until the dent is flush.
About Logistics:
After receiving the payment, we will send your parcel from California within 2 days (usually within one day). You can usually receive the parcel in 4-7 days. The logistics is very fast, so don't worry.
About us:
We are from California, USA, and we are committed to building a good reputation to ensure that every customer is satisfied with us. Your satisfaction is our driving force. If you have any questions or comments about our products. please feel free to contact us.
We will try our best to satisfy customers. If you are not satisfied for any reason, please do not leave negative/neutral feedback soon.
We strive to ensure that every customer is 100% satisfied and solve any problems for you. ToIf you are not satisfied with this project. Please visit the store, there are more similar products waiting for you.