Paintless Car Dent Removal Tools Kit Auto Hail Dint Repair Puller Slider Hammer

Description

WHY DO YOU NEED AN PAINTLESS DENT REMOVAL KIT?
*Saves money on costly dent repairs
*Removes dents without damage to the paint
*Enhances the look and increases the value of your vehicle
*Comes with professional-use components
PACKING LIST
1x
2-IN-1 Dent Repair Puller Slider T-bar Hammer
1x 20W Glue Gun
5x Black Glue Sticks
5x Yellow Glue Sticks
24 x Glue Puller Tabs in Purple
18 X
Glue Puller Tabs in Blue
1 x Rubber Hammer
5 x Tap-down Nylon Pens
1 x Plastic Bottle
1 x Small plastic shovel
1 x Cleaning Cloth
Go to below website and see the video, you will clearly undertand how easy to use the tool:
https://www.youtube.com/watch?v=ak5ue1WqIOs
https://www.youtube.com/watch?v=e0_idbCfF0U
https://www.youtube.com/watch?v= BBp7bCnhTEE
Step-By-Step Instructions for Repairing Car Dent
Paintlessly
1. Prep tabs by soaking them in 91% rubbing alcohol and drying them before first use.
2. Insert a glue stick into the glue gun. Plug in the glue gun and allow it to heat up for 5 minutes.
3. Clean the area to be repaired with 91% is alcohol and a clean towel.
4. Select the correct sized dent pulling tab by comparing it to the size of the dent.
5. To save time when doing multiple repairs, glue and place all of the tabs at once on the vehicle, then do all of the repairs.
6. Apply hot glue to the dent pulling tab by pulling on the trigger of the glue gun until approximately a dime sized amount of glue is released. Use a penny sized drop of glue for smaller tabs and a dime size or slightly more for larger tabs
7. Apply the dent pulling tab to the exact center of the dent.
8. Allow the glue to dry for about 5 minutes. The glue should be hard to the touch at the time you begin repair.
9.
Align the T-bar  with tab, one hand hold the top T-bar handle and keep it still, another hand pull the sliding rod backwards to pull up the dent
10
. Spray 91% rubbing alcohol on the edge of the glue residue and peel it away using the plastic scraper.
11. Pls be patience and repeat above above steps several times to reach a desired effect.
12. If a high spot is created, gently tap down any high spots using the dent hammer and the plastic tap down tool provided, until the dent is flush.
* Any problems pls contact us at any time before leaving a negative/neutral feedback. Many thanks to you.
Local Warehouse in  California, U.S.