US Car Body Dent Puller Hammer Tool Paintless Hail Damage Remover Repair Kit

Description

Auto Kit Car Hail Auto Body Paintless Dent Removal Repair Tools Damage Remover
Description
Green is the applicable area, red is the inapplicable area, the diameter of the dent area must be greater than 2cm to be applicable.
Common problems:
1. Insufficient heating of glue
Fully heat for 5-7 minutes, until there is liquid from the muzzle or press the switch lightly, the glue will be released
2. The glue is too little and too thin on the gasket
It needs to be even and thick, and you can apply a little more in the middle, and quickly stick to the recessed area after applying
3. Wrong pulling direction
When pulling, it should be as vertical as possible to the body
4. Too much pulling force
Should be uniform and moderate, repeat the operation many times
5. Too much force to stick the suction cup
Too much force will easily squeeze the glue to the outside, you should press gently for 2-3 seconds
6. Pull time issues
After the suction cup is attached, pull it when the glue cools down and there is residual temperature. The temperature of the sol is too high or it is completely cooled before pulling it, it will easily fall
7. The suction cup is very easy to fall off because of floating dust or water on the surface
The sunken area should be washed with water and dried with a towel
8. The car body temperature is too high in summer
Use cold water to cool the recessed area first, and then dry the water
9. The car body temperature is too low in winter
First heat the recessed area with hot water, and then dry the water
10. sucker size problem
The larger the suction cup, the greater the suction power, which is suitable for the flat and concave area
Important:
Due to the difference in the heating time of the adhesive strip and the thickness of the application, it may fall off in one operation, so you need to be patient and repeat the operation several times! ! You can also experiment with other things to determine whether the glue is sticky! !
Is the residual glue not clean?
1. Use high-concentration alcohol to clean up with a spatula while spraying (diesel, gasoline and asphalt can also be tried)
2. Use a hot air blower to heat the glue, and then clean it with a spatula
3. Use hot water above 80 degrees Celsius to clean up with a spatula while pouring it
4. The alcohol bottle is empty, it should be a transportation restriction, sorry about that
How to repair the dent on your car with dent puller set?
1. Prep tabs by soaking them in 91% rubbing alcohol and drying them before first use.
2. Insert a glue stick into the glue gun. Plug in the glue gun and allow it to heat up for 5 minutes.
3. Clean the area to be repaired with 91% isopropyl rubbing alcohol and a clean towel.
4. Select the correct sized dent pulling tab by comparing it to the size of the dent.
5. To save time when doing multiple repairs, glue and place all of the tabs at once on the vehicle, then do all of the repairs.
6. Apply hot glue to the dent pulling tab by pulling on the trigger of the glue gun until approximately a dime sized amount of glue is released. Use a ‘pea’ sized drop of glue for smaller tabs and a dime size or slightly more for larger tabs.
7. Apply the dent pulling tab to the exact center of the dent.
8. Allow the glue to set for about 5 minutes. The glue should be hard to the touch at the time you begin repair.
9. Slide the dent lifter device directly over the dent pulling tab shaft until the female adapter in the center of the dent lifter slides over the shaft of the tab. Adjust the height knob accordingly.
10. The T-Hand Puller may be used for larger dents or to remove the last 10-20% of a dent.
11. Squeeze the dent lifter handle slowly several times until the desired result is achieved. As the damage gets smaller, reduce the size of the dent pulling tab until the dent becomes flush.
12. Spray 91% rubbing alcohol on the edge of the glue and peel it away using the plastic scraper.
13. If a high spot is created, gently tap down any high spots using the dent hammer and the plastic tap down tool provided, until the dent is flush.
Features：
1.2 In 1 T-bar Puller(long and short type)
2. Easy To Operate,it's Very Easy To Control, Everyone Can Removal The Dent Easily By Yourself
3. Will Not Hurt The Car's Surface
4. Metal Structure, Strong and Durable
5.2th Updated,The Body Is Lighter To Handle
6.18pcs different size tabs ,for big or small dents
7.High viscosity glue sticks, faster repair the dent
Packing lncluded:
1x 2-in-1 Dent Removel T Bar Tools
1x 20w Glue Gun
18x Glue Pulling Tabs
10x Glue Sticks
1x Empty Bottle
1x Glue Removal Scrapper
1x Dish Cloth
1x Instruction
Returns and Exchanges
※ If you have any questions you may reach us via ebay message.
※ Please Do Not click "Return this item" in any situation as following picture shows. Because sometimes it will spend more time to resolve the issue for those items needn't to be returned for a replacement after fully communication. Click "Contact seller" via Ebay Message(protected by Ebay),that is the fastest way to solve any problem for you.
※ A Merchandise Authorization Number (RMA#) is required for all need returned packages (After we have a fully communication). Please contact us to get an ""RMA"" number before you ship your items back to us. Items returned without an ""RMA"" number would be ignored or delayed in processing. Returns/Exchanges will not be accepted unless authorization has been issued by our customer service.
※ All NON-Seller Mistake returns for refund are subject to 20% re-stocking fee and buyer should pay for the return shipping fee and handle fee.(For example,you brought wrong item or cancelled order after item was shipped).
※ All return products should be in brand new state with all accessories included.
※ Refunds will be given via paypal only.
Payment and Shipping
※ We only ship to paypal confirmed address.If you want to change the address or let us send it directly to your relevant or friends, please kindly contact us when you make payment.
※ We will ship all orders asap. from Texas via USPS or UPS.( No service on Weekend and public holidays).
※ Delivery time within the U.S. is usually just 3 to 5 business days, however in rare cases it could take 5 to 7 business days.
※ No combined shipping discount offered and no pick-up service.
※ Only PayPal accepted.
※ All orders delivered to Texas (TX) are charged the applicable sales tax.
Warranty
※ We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
※ Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
※ Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
※ For malfunction products under warranty period, please contact our customer service via EBay Message.
Customer Satisfaction
※ Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any question or concern, please contact us via ebay message.If you don't get response within 1-2 business days, please check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my emails.
※ If you are happy with your purchase, We appreciate you will take a moment to leave POSITIVE Feedback for us upon receipt of your item.
※ Positive feedback will be left automatically to customers when your payment is cleared.
※ We are responsible company, only strive for 5 star positive feedback and will try our best to offer the best service to our buyer. Please email us before leaving negative feedback or open any dispute and please give us 3 business days to resolve the complaint to your satisfaction.