US Car Paintless Dent Repair Kit PDR Tools Slide Hammer Puller Bridge & Lifter

Description

US Car Paintless Dent Repair Kit PDR Tools Slide Hammer Puller Bridge & Lifter
Packing Listing
21pcs Paintless Dent Removal RODS (5A+10B+6C)
1pc Paintless Dent Removal Line Board
1pc Dent Lifter
1pc 100W Glue Gun
1pc Metal Tap down with 9 heads
5pcs Tap Down
10pcs Pro Glue Sticks
20pcs Pro Tabs
1pc T-bar
1pc Tap Down Hammer
1pc Rubber Hammer
1pc Slider Hammer Lifter
1pc Bridge Puller with 7 Pulling Tabs
1pc tool bag
1pc Yellow shovel
1pc bottle
1pc blue clean cloth
How to Use
1. Find the dent by the line board ( through the refraction of light )and clean it with rag and alcohol.
2. Then clean the glue stick with alcohol to remove the grease on its surface.
3. Insert the glue into the glue gun and connect the gun to the power supply , then heat it about 2-5 minutes until there is some hot glue spilling out from the gun.
4. Choose a tab whose shape is the most similar to the dent and pay attention to the hot glue which should begin from the centre of the tab , and with the circle action to smear it cover the tab, but should not overstep . ( The tab bigger the traction stronger , so if the dent is big , you should choose a big tab . )
5. You should quickly paste the tab to the dent and press it until the hot glue is firmed.
6. Fasten the Dent Lifter or T-shaped Repairer or Hammer or Bridge Puller and hold its two handles, up and down with power gradually , repeat your action until the dent is repaired or flatted , and don’t let the tab go off the car body. What’s more, you should pay attention to your power and not be rushed .
7. After repaired, spray the adhesive remover on the part where covers glue and remove it with a scraper .
8. Check the repair effect again, if not very well , please repeat the above steps until be repaired. Recommend these tools. DIY is much cheap than body shop.
Paintless Dent Removal RODS
There are 21 Pieces different Blue Rods
The tails have 21 kinds of shapes
The materials is stainless steel, won't easy to bent and rust
Convenient for different dents in different parts of a car
The handles are easy to use and convenient to operate
WHDZ Paintless Dent Removal Line Board - Check the dent when you're not sure where is the dent
Metal bridge dent puller :made of environmental metal material
7 pulling discs: screws were enough long just easily fix dent of all size
Glue gun: 100w glue gun melting glue stick is more faster and this glue gun not only use for repair dent but also adhesive art products
Its for aligning the reflected lines of the board to a dent.It works best when there is plenty of sun light. The reflection becomes distorted where the dent is and you can then work your PDR tool behind the dent to make the distorted image even or uniform again, once the distorted image or lines become parallel in the reflection you have successfully removed the DENT!
Convenient when working outside with a natural light
Size: 30cm * 21cm; Steady suction arm with a powerful cup for 360 any angle
The Red dent lifter is designed to remove small dents and hail damage.
made from light weightaluminum then powder coated.
Padded feet add support for maximum pulling power while not denting surrounding areas.
Hand unit allows for controlled leverage while removing dents.
1.Please verify the shipping address you provided at checkout was correct.
2.Generally,Items will be shiped as soon as possible within 72 hours from Guang Zhou China.
Pay attention:
1.The additional duties, tariffs, value added tax (VAT), Brokerage Fees, etc. are responsibility of the buyer.
2.Please check with your country's customs office to determine what these additional costs may be prior to purchasing.
We accept payment via PAYPAL ONLY.
1.Please read the product description and examine the picture carefully before bidding.
2.Return or refund can only be provided if the DOA or project description of the project
does not meet your needs due to an error in the project description.
3.If the buyer buys the product by mistake and the goods remain in good resale condition, the seller pays all the related freight.
The buyer shall be responsible for all related shipping costs.
Please contact us through eBay message if you have any questions about our items.
We really appreciate it for your support.
Thank you so much.
Our working time :9:00AM~6.00PM.
Please contact us before leaving any negative or neutral feedback.
Please allow us to rectify any problem before you leave us a bad feedback
Packing Listing
21pcs Paintless Dent Removal RODS (5A+10B+6C)
1pc Paintless Dent Removal Line Board
1pc Dent Lifter
1pc 100W Glue Gun
1pc Metal Tap down with 9 heads
5pcs Tap Down
10pcs Pro Glue Sticks
20pcs Pro Tabs
1pc T-bar
1pc Tap Down Hammer
1pc Rubber Hammer
1pc Slider Hammer Lifter
1pc Bridge Puller with 7 Pulling Tabs
1pc tool bag
1pc Yellow shovel
1pc bottle
1pc blue clean cloth
How to Use
1. Find the dent by the line board ( through the refraction of light )and clean it with rag and alcohol.
2. Then clean the glue stick with alcohol to remove the grease on its surface.
3. Insert the glue into the glue gun and connect the gun to the power supply , then heat it about 2-5 minutes until there is some hot glue spilling out from the gun.
4. Choose a tab whose shape is the most similar to the dent and pay attention to the hot glue which should begin from the centre of the tab , and with the circle action to smear it cover the tab, but should not overstep . ( The tab bigger the traction stronger , so if the dent is big , you should choose a big tab . )
5. You should quickly paste the tab to the dent and press it until the hot glue is firmed.
6. Fasten the Dent Lifter or T-shaped Repairer or Hammer or Bridge Puller and hold its two handles, up and down with power gradually , repeat your action until the dent is repaired or flatted , and don’t let the tab go off the car body. What’s more, you should pay attention to your power and not be rushed .
7. After repaired, spray the adhesive remover on the part where covers glue and remove it with a scraper .
8. Check the repair effect again, if not very well , please repeat the above steps until be repaired. Recommend these tools. DIY is much cheap than body shop.
Paintless Dent Removal RODS
There are 21 Pieces different Blue Rods
The tails have 21 kinds of shapes
The materials is stainless steel, won't easy to bent and rust
Convenient for different dents in different parts of a car
The handles are easy to use and convenient to operate
WHDZ Paintless Dent Removal Line Board - Check the dent when you're not sure where is the dent
Metal bridge dent puller :made of environmental metal material
7 pulling discs: screws were enough long just easily fix dent of all size
Glue gun: 100w glue gun melting glue stick is more faster and this glue gun not only use for repair dent but also adhesive art products
Its for aligning the reflected lines of the board to a dent.It works best when there is plenty of sun light. The reflection becomes distorted where the dent is and you can then work your PDR tool behind the dent to make the distorted image even or uniform again, once the distorted image or lines become parallel in the reflection you have successfully removed the DENT!
Convenient when working outside with a natural light
Size: 30cm * 21cm; Steady suction arm with a powerful cup for 360 any angle
The Red dent lifter is designed to remove small dents and hail damage.
made from light weightaluminum then powder coated.
Padded feet add support for maximum pulling power while not denting surrounding areas.
Hand unit allows for controlled leverage while removing dents.